Side Trim, 2-door

Side Trim, 2-door

• Removal and installation is described for the right side of the vehicle. Removing and installing on the left side is identical.

Removing

- Remove the B-pillar upper trim. Belt anchor rail does not need to be removed from front seat belt. Refer to => [ Upper B-Pillar Trim ] Upper B-Pillar Trim.

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Remove cover cap - 1 - from mounts and remove screw - 2 - (2 Nm).

- Remove sill panel trim from mounts in side trim in lower area.

- Remove side trim from mounts in body.

- In vehicles with radio system, disconnect wiring harness from speaker - 3 -.

- In vehicles with interior monitoring system, disconnect wiring harness from sensor.






Installing

- Install in reverse order of removal.

• Before installation, inspect the retaining clips for damage and replace if necessary.