Windshield and Headlamp Washer Fluid Reservoir Filler Neck

Windshield and Headlamp Washer Fluid Reservoir Filler Neck

Removal

- Disconnect connecting tube - 1 - from filler tube - 3 - of tank for windshield washer system and headlamp cleaning system.






- Remove screw - 2 -.

- Unclip hose retainer from filler tube - 3 - and remove filler tube - 3 - from vehicle.

Installation

Install in reverse order of removal, noting the following:

Casting mark on under side of filler tube must be inserted into engine mounting hole - arrow -.






Connecting tube - 1 - and filler tube - 2 - must be joined so that the guides - arrows - engage in each other.