Clutch Pedal

Clutch Pedal

Special tools, testers and auxiliary items required

• Pliers (T10005)

• Assembly Tool (T10178)

• Torque Wrench (5-50 Nm) (V.A.G 1331)

Removing

Remove the over-center spring. Refer to the following:

Golf/GTI (from 2010), refer to => [ Over-Center Spring ] Over-Center Spring.

- Unlock the clutch pedal from clutch master cylinder using the pliers (T10005).






- Remove the clutch pedal.

Installing

• Replace the self-locking nuts.

- Attach the mount - 2 - to the master cylinder actuator rod - 1 -.






- Press the mount in until it engages audibly in the clutch pedal - 3 - opening.

Install the over-center spring. Refer to the following:
m

Golf/GTI (from 2010), refer to => [ Over-Center Spring ] Over-Center Spring.