Ribbed Belt Pulley Without Freewheel

Ribbed Belt Pulley Without Freewheel

Special tools, testers and auxiliary items required

• Socket (VAS 3310)

• Torque Wrench (V.A.G 1332)


Follow the procedure in the Repair Information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

• Check the generator.

Removal

- Remove generator. Refer to 2.5L => [ Generator ] Generator, 2.0L TSI => [ Generator ] Generator or 2.0L TDI => [ Generator ] Generator.

- Tighten the generator in a vise at the mounting points.

- Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.






Installation

Install in reverse order of removal, noting the following:

- Tighten the threaded connection to 65 Nm.