Fog Lamp Golf

Fog Lamp Golf

• Illustrations depict removal and installation of left fog lamp.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Unclip cover cap - 1 - from locking mechanisms.






- Remove bolt - arrow -.






- Remove the fog lamp housing from the bumper cover. Pay attention to the wires still connected.






- Disconnect the connector - arrow - and remove the fog lamp housing.

Installation

Install in reverse order of removal, noting the following:

- Tighten the threaded connections to the tightening specification given in the assembly overview. Refer to => [ Fog Lamp, Golf Overview ] Fog Lamp, Golf Overview.

- Check headlamp for function.

- Check the headlamp adjustment and adjust if necessary.