Entry Lamp In Exterior Rearview Mirror (W52)/(W53)

Entry Lamp in Exterior Rearview Mirror (W52)/(W53)

Driver entry lamp in exterior rearview mirror (W52) as well as Front passenger entry lamp in exterior rearview mirror (W53) is installed in housing of left and right exterior mirror.

• The exterior mirror must not be removed to remove and install the entry lamps.

• Removing and installing driver side and front passenger side entry lamp is the on both sides and is only described for one side.

Removal

- Switch off ignition, switch off all electrical consumers and remove ignition key.

- Remove the mirror glass.

Remove both bolts - arrows -.






- Release the latch - arrow - and lower the mirror housing lower section slightly.






- Carefully push the entry lamp - 1 - upward and out of the mirror housing lower section.






- Pull the bulb socket - 1 - out of the entry lamp - 2 -.






Installation

Install in reverse order of removal, noting the following:

• Check the exterior mirror function after installing it.