Air Intake Housing

Air Intake Housing

Removing

- Remove the instrument panel.

- Loosen the heater and A/C unit on the left side.

- Loosen the bolts - 1 -.






- Lift air intake housing - in direction of arrow A -.






- Unhook the air intake housing - in direction of arrow B - from the anchoring.

Installing

- Install in reverse order of removal. Make sure the housing fits correctly with the mounts - 1 - in the hooks - 2 -.






- After installing, function of recirculation door must be checked. Perform the "basic setting" function for the adjustment motor using the Vehicle Diagnostic Tester.