Wind Deflector

Wind Deflector

Special tools, testers and auxiliary items required

• Special Hook (3370)

Removing

- Open sunroof glass panel completely.

- Press wind deflector with height stop out of front roof opening and tilt wind deflector open vertically.






- Insert special tool (3370) between roof edge and wind deflector bearing - arrow -.

- Pull wind deflector bearing out of side locking mechanism of left and right guide rails using special tool (3370) in - direction of arrow -.

- Remove wind deflector upward from guide rail.

Installation

- Insert wind deflector into guide rail and slide wind deflector with height stop under front roof opening at left and right sides.

- Using light pressure, press wind deflector bearing into guide rails.

• Wind deflector bearing must engage in guide rails audibly.