Trim, Wheel Housing, 4-door, Without Side Airbag, from 06.05

Trim, Wheel Housing, 4-door, Without Side Airbag, from 06.05

• Removal and installation is described for the right side of the vehicle. Removing and installing on the left side is identical.

Removing

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Fold backrest forward.

- Remove cover cap - 1 - from wheel housing trim - 2 -.






- Remove the two bolts - 1 - (1.5 Nm).






- Remove nut - 1 - (3.5 Nm).

- Loosen trim in center from door seal molding - arrow A -.

- Loosen upper area of trim - arrow B - from mount.

- Remove trim from window flange - 2 -.

- Loosen trim in lower area - arrow C - from mountings.

- Loosen trim from pins - 3 -.






Installing

- Install in reverse order of removal.