Joint-Free Wiper Blades

Joint-Free Wiper Blades

- Remove the joint-free wiper. Refer to=> [ Joint-Free Windshield Wiper ] Joint-Free Windshield Wiper.

- Check on which side the wiper blade cannot be moved in guide.

- Carefully pry out the cap - 1 - on the side on which the wiper blade cannot slide into the guide.






- Using a suitable screwdriver, open the wiper blade retainer - A - by bending it up.






- Replace the wiper blade.

• Make sure that the wiper blade is seated correctly in the wiper blade guides.

- Press the wiper blade retainer - A - back down with a suitable screwdriver until the wiper blade can no longer slide into the guide.






- Install the new cap - 1 - and check for secure seating.






- Reinstall the wiper blade. Refer to=> [ Joint-Free Windshield Wiper ] Joint-Free Windshield Wiper.

- Check the wiper blade for proper functioning.