Diagram 139/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver side airbag crash sensor, Front passenger side airbag crash sensor, Airbag control module, Driver thorax airbag igniter, Front passenger thorax airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G179 - Driver side airbag crash sensor Locations [1][2]Diagrams

G180 - Front passenger side airbag crash sensor Locations [1][2]Diagrams

J234 - Airbag control module Control modules in front part of vehicle - Overview of Control Modules

N131 - Front passenger airbag igniter 1 Airbag Component Locations Front passenger airbag igniter 1 -N131- / Front passenger airbag igniter 2 -N132-

N199 - Driver thorax airbag igniter Airbag Component Locations Driver thorax airbag igniter -N199- / Front passenger thorax airbag igniter -N200-

N200 - Front passenger thorax airbag igniter Airbag Component Locations Driver thorax airbag igniter -N199- / Front passenger thorax airbag igniter -N200-

T2av - Double connector

T2aw - Double connector

T3ao - 3-pin connector

T3ap - 3-pin connector

T3k - 3-pin connector

T3l - 3-pin connector

T3q - 3-pin connector

T28 - 28-pin connector

T28a - 28-pin connector

T75 - 75-pin connector

(312) - Ground connection 2 (in airbag wiring harness)

* - Not for USA

*2 - Omitted as a running change

*3 - Running change

Previous Diagram 139/3 (Tracks 15-28)

Next Diagram 139/5 (Tracks 43-56)