Brake Caliper Overview, FS III

Brake Caliper Overview, FS III

• Install complete repair kit when servicing.

• Only use mineral spirits to clean brake parts.

• Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.






1 - Dust Cap

• Install onto bleeder valve.

2 - Bleeder Valve

• 10 Nm

• Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing in.

3 - Caps

• Insert in bushing.

4 - Guide Pins

• 30 Nm

5 - Bearing Bushing

• Insert in brake caliper.

6 - Brake Caliper

7 - Cap

• Removing and Installing, refer to => [ Brake Caliper Piston, FS III ] Brake Caliper Piston, FS III.

• Do not damage when installing piston.

8 - Pistons

• Removing and Installing, refer to => [ Brake Caliper Piston, FS III ] Brake Caliper Piston, FS III.

• Apply thin coat of assembly paste G 052 150 A2 to piston before inserting.

9 - Seal

• Removing and Installing, refer to => [ Brake Caliper Piston, FS III ] Brake Caliper Piston, FS III.