Diagram 152/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Automatic transmission hydraulic pressure sensor 1, Automatic transmission hydraulic pressure sensor 2, Clutch oil temperature sensor, Engine control module, DSG transmission Mechatronic, Solenoid valve 1, Solenoid valve 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G182 - Transmission input speed sensor Locations

G193 - Automatic transmission hydraulic pressure sensor 1 Locations

G194 - Automatic transmission hydraulic pressure sensor 2 Locations

G509 - Clutch oil temperature sensor Locations

J623 - Engine control module Control modules in front part of vehicle - Overview of Control Modules

J743 - DSG transmission Mechatronic Control modules in front part of vehicle - Overview of Control Modules DSG Transmission Mechatronic -J743-

N88 - Solenoid valve 1 Locations

N89 - Solenoid valve 2 Locations

T4z - 4-pin connector

T20e - 20-pin connector

T94 - 94-pin connector

(132) - Ground connection 3 (in engine compartment wiring harness)

(640) - Ground connection 2 in engine compartment, left Overview Of Ground Connections in Engine Compartment

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(D104) - Positive connection 2 (30a) (in engine compartment wiring harness)

* - Standard equipment

Previous Diagram 152/3 (Tracks 15-28)

Next Diagram 152/5 (Tracks 43-56)