Wiper Arm: Service and Repair

Windshield Wiper Arm

Special tools, testers and auxiliary items required

• Puller (T10369/1)

- Pry off cover caps - arrows - using a suitable screwdriver.






- Slide the arms of the (T10369/1) - 2 - under the wiper arm - 4 - as shown in the illustration.






The windshield wiper shaft can be damaged.

Always use the thrust piece - 3 - to loosen the wiper arm.

- Turn the pressure bolt - 1 - on the puller clockwise until the thrust piece - 3 - makes contact with the wiper shaft. Using a 6 mm socket head wrench, rotate the pressure bolt - 1 - on the puller clockwise until the wiper arm - 4 - is released from the shaft.

- Remove the puller and the wiper arm.

- If necessary, repeat this procedure on the front passenger side.