Modifying the Adapter for Oil Filling (VAS 6262 A)

Modifying the Adapter for Oil Filling (VAS 6262 A)

Note the following information:

• Regarding the repair information, refer to => [ General Repair Information ] General Repair Information.

• It may be necessary to shorten the pipe on the adapter for oil filling (VAS 6262 A).

Shortening the Pipe on the Adapter for Oil Filling (VAS 6262 A) :

- Shorten the pipe to dimension - a -. This assures the pipe on the adapter for oil filling (VAS 6262 A) will not touch the bottom of some oil containers.






- a - = 210 mm

• Dimension - a - is measured starting from the green surface in the cap on the adapter for oil filling (VAS 6262 A).

- Make a mark on the pipe at dimension - a -, and cut it using the pipe cutter (VAS 6056/2).