Ribbed Belt Pulley without Freewheel

Ribbed Belt Pulley without Freewheel

Special tools, testers and auxiliary items required

• Socket (VAS 3310)

• Torque Wrench (V.A.G 1332)

Removing

- Remove generator. Refer to 2.0L => [ Generator ] Generator or 3.6L => [ Generator ] Generator.

- Tighten the generator in a vise at the attachment points.

- Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.






Installing

Install in reverse order of removal. Note the following:

- Tighten the threaded connection to 65 Nm.