Fuel Level Sensor G

Fuel Level Sensor G

• Read the safety precautions before starting. Refer to => [ Safety Precautions ] Fuel Supply.

• Pay attention to the rules of cleanliness. Refer to => [ Clean Working Conditions ] Fuel Supply.

• Fuel tank and attachments overview. Refer to => [ Fuel Tank and Attachments Overview ] Fuel Tank and Attachments Overview.

Removing

- Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Pull the fuel level sensor slightly to the side and upward at the same time.






- If the sensor cannot be released this way, then press the retaining tabs - arrows - back slightly.






- Note the colors of the wires for installing later.

- Disconnect the wires - 1 through 3 -. Bend the hooks back.






Installing

- Connect the wires - 1 through 3 -. Pay attention to the colors.






- Gently pull on the wires to make sure they are secure.

- Insert the fuel level sensor in the guide on the fuel delivery unit and push down until it engages.

- Install the fuel delivery unit. Refer to => [ Installing ] Fuel Delivery Unit.