Brake Booster Vacuum Sensor (G483)

Brake Booster Vacuum Sensor (G483)

Removing

On vehicles with a 6-cylinder gasoline engine, the battery is in the luggage compartment, accordingly only the air filter housing must be removed.

- Remove the battery carrier.

- Disconnect harness connector - 1 - from brake booster vacuum sensor - 2 -.






- Insert a screwdriver between the stop and one end of the securing ring into the groove of the sealing ring.

- Press the circlip - 1 - just far enough out of the groove so that the brake booster vacuum sensor - 2 - can be pulled out of the brake booster.






Installing

- Install in reverse order of removal.