Diagram 74/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag control module, Instrument cluster control module, Data bus on board diagnostic interface, Seat belt indicator lamp, Airbag indicator lamp, Battery interrupt igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery

J234 - Airbag control module Control Modules in Interior [1][2]Air Bag Control Module

J285 - Instrument cluster control module Control Modules in Interior

J533 - Data bus on board diagnostic interface Control Modules in Interior

K19 - Seat belt indicator lamp

K75 - Airbag indicator lamp

N253 - Battery interrupt igniter

T2fp - Double connector

T16d - 16-pin connector, on the diagnostic connector

T20e - 20-pin connector

T32c - 32-pin connector

T100a - 100-pin connector

TV15 - Wiring connector

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

* - Diagnostic connector

*2 - Only for vehicles with a battery in the luggage compartment

*3 - Depending on equipment

Previous Diagram 74/8 (Tracks 85-98)