Ignition Coil: Service and Repair

Ignition Coil with Power Output Stage

Special tools, testers and auxiliary items required

• Ignition Coil Puller (T40039)

Removing

• Follow all safety precautions. Refer to => [ Safety Precautions ] Safety Precautions.

• Ignition system component overview. Refer to => [ Ignition System Component Overview ] Service and Repair.

• To pull out the spark plugs, place the ignition coil puller (T40039) on the topmost thick rib - arrow - of the ignition coil with power output stage.






• The lower ribs may be damaged if they are used.

- Pull all the ignition coils out approximately 30 mm from the spark plug holes using the ignition coil puller (T40039).






- Release the connectors - arrows - and remove all connectors from the ignition coils at the same time.






Installing

- Insert all ignition coils loosely into the spark plug shafts.

- Align the ignition coils with the connectors - arrows - and connect them all at the same time.






- Press the ignition coils evenly onto the spark plugs by hand.