Charge Air Cooler System Overview

Charge Air Cooler System Overview

The charge air pipe clamps must be tightened to 5.5 Nm. An insufficient or excessive tightening torque can cause the charge air hose to come off the charge air pipe while driving.






1 Bolt

• 5 Nm

2 Mount

• For the charge air cooler.

3 Charge Air Cooler

• Removing and installing, refer to one of the following:

Eos, Passat and CC, refer to => [ Charge Air Cooler ] Charge Air Cooler.

4 Charge Air Pipe

5 Bolt

• 10 Nm

6 from the Turbocharger

7 Charge Air Hose

• Disconnecting and connecting, refer to => [ Charge Air Hose, Disconnecting and Connecting ] Charge Air Hose, Disconnecting and Connecting.

8 to the Throttle Valve Control Module

9 Charge Air Hose

10 Bolt

• 10 Nm

11 Bolt

• 5 Nm

12 Charge Air Pressure Sensor (G31)

13 Charge Air Pipe

14 Charge Air Hose

• Disconnecting and connecting, refer to => [ Charge Air Hose, Disconnecting and Connecting ] Charge Air Hose, Disconnecting and Connecting.