Air Injection Vacuum Control Solenoid Valve: Service and Repair

Secondary Air Injection Solenoid Valve N112

Removing

- Remove the air filter housing. Refer to => [ Air Filter Housing ] Air Filter Housing.

- Remove the battery, the battery tray bolts - arrows - and tray.






- Disconnect the connector - A - and hose - B - from the Secondary Air Injection (AIR) solenoid valve.






- Loosen the coolant pipe; remove the bolts - arrows -.






- Remove the bolts - arrows - and remove the AIR solenoid valve






Installing

Install in the reverse order of removal. Note the following:

- Replace the gaskets.