Rear Vent

Rear Vent

Removing

- Remove the rear trim.

- Remove the screws - 1 - and unhook the vent.






Installing

- Install the vent into the loops on the trim - arrows -.






- Tighten the screws - 1 -.

- Make sure the open/close thumbwheel - 1 - works correctly.






If the open/close thumbwheel works:

- Tighten the screws - 1 - to 1.5 Nm.






If the open/close thumbwheel does not work:

- Loosen the screws - 1 - and adjust the vents until the open/close thumbwheel.






- Tighten the screws - 1 - to 1.5 Nm.

- Install the rear trim.