Front Center Vents

Front Center Vents

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• Front-end Hook (3370)

Removing

- Insert the (3409) between the center vent and instrument panel.






- Insert the (3370) between the center vent and instrument panel.






- Remove the center vent from the instrument panel using the (3370).

Center vent, disassembling and assembling, refer to => [ Front Center Vents, Disassembling and Assembling ] Front Center Vents, Disassembling and Assembling.

Installing

Installation is carried out in the reverse order while noting the following:

- First insert the top of the center vent - arrows A - into the instrument panel.






- Pay attention to the alignment - arrow B - on the instrument panel when installing the center vents.