Brake Pedal, Separating from Brake Booster

Brake Pedal, Separating from Brake Booster

Special tools, testers and auxiliary items required

• Release Tool (T10159)

- Remove the trim on the driver side. Refer to "Storage Compartments, Covers and Trim".

- First press brake pedal in direction of brake booster and hold.






2 Pressure Rod
3 Retaining Lugs

- Insert (T10159) and pull in direction of driver seat. When doing this, counter-hold on the brake pedal. (At this moment the pedal must not be allowed to move backward). The mounting retaining lugs - 3 - will thereby be pressed off the ball head of the push rod - 2 -.

The process of separating the brake pedal from the brake booster is shown with the pedal assembly removed.

- Pull (T10159) and brake pedal together toward the driver seat. (The brake pedal will thereby be pulled off the ball head of the push rod).