Rear Lid Trim Panel, Passat Wagon from MY 2006

Rear Lid Trim Panel, Passat Wagon from MY 2006

Removing

- Open the cover for the trim panel and remove the emergency triangle.

- Remove bolts - 1 - and - 3 - (1.5 Nm) respectively on right and left sides in handle recesses.

- Remove cover from trim and unscrew two bolts - 2 - (1.5 Nm).

- Using pliers (3392) , disengage trim - 4 - out of mounts in lid.

- Disengage trim - 4 - at the side from mounts in window frame trim - 5 -.

- For vehicles with electric lid control, disconnect wiring harness from switch - 6 -.






Installing

- Install in reverse order of removal.

• Before installing, check metal clips for damage and replace if necessary.