Diagram 84/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Charge air pressure sensor, Knock sensor 1, Manifold absolute pressure sensor, Intake manifold runner position sensor, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G31 - Charge air pressure sensor Locations Diagrams

G61 - Knock sensor 1 Locations Knock Sensor 1 -G61-

G71 - Manifold absolute pressure sensor

G336 - Intake manifold runner position sensor Locations [1][2]Diagrams

J623 - Engine control module, in the center plenum chamber Control Modules in Engine Compartment

T3be - 3-pin connector

T3bh - 3-pin connector

T4bm - 4-pin connector

T6bu - 6-pin connector, near the cylinder head

T14a - 14-pin connector, in the engine compartment, left

T60 - 60-pin connector

(D103) - Connection (3) (in engine compartment wiring harness)

(D107) - Connection (5) (in engine compartment wiring harness)

Previous Diagram 84/9 (Tracks 99-112)

Next Diagram 84/11 (Tracks 127-140)