Wire Routing, Connectors and Valve Body Bracket

Wire Routing, Connectors and Valve Body Bracket

In this chapter the information regarding working on the solenoid valves is shown in illustrations.

Wiring Routing and Connectors

• Mark the solenoid valve and/or sensor and its connector before disconnecting them.






1 - Solenoid Valve 4 (N91)

2 - Solenoid Valve 6 (N93)

3 - Solenoid Valve 5 (N92)

4 - Solenoid Valve 9 (N282)

5 - Solenoid Valve 10 (N283)

6 - Solenoid Valve 3 (N90)

7 - Solenoid Valve 1 (N88)

8 - Solenoid Valve 2 (N89)

A - Transmission Output Speed Sensor Connector

B - Transmission Input Speed Sensor Connector

Bracket for Connectors, Securing the Wires






1 - Transmission Output Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

2 - Transmission Input Speed Sensor Connector Bracket

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

3 - Transmission Fluid Temperature Sensor (G93)

4 - Shift Lever

• Tightening specification, refer to => [ Fastener Tightening Specifications ] Fastener Tightening Specifications - Gears, Hydraulic Controls.

Arrows - The wires are attached here