Diagram 34/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Parking brake indicator lamp switch, Outside air temperature sensor, Engine coolant level sensor, Windshield washer fluid level sensor, Instrument cluster control module, Instrument cluster





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E2 - Turn signal switch

F9 - Parking brake indicator lamp switch

G - Fuel level sensor Locations

G1 - Fuel gauge

G3 - Engine coolant temperature gauge

G6 - Transfer fuel pump Locations [1][2]Diagrams

G17 - Outside air temperature sensor

G32 - Engine coolant level sensor Locations

G33 - Windshield washer fluid level sensor

H3 - Warning buzzer and tone

J285 - Instrument cluster control module Control modules in interior

J538 - Fuel pump control module Fuel Pumps and Sensors Control modules in interior

K - Instrument cluster

K13 - Rear fog lamp indicator lamp

K171 - Hood -open- indicator lamp

K220 - Tire pressure monitoring display indicator lamp

T2z - Double connector

T5b - 5-pin connector

T10v - 10-pin connector

T16j - 16-pin connector

T32c - 32-pin connector

(372) - Ground connection 7 (in main wiring harness)

(410) - Sensor ground connection 1 (in main wiring harness)

* - Depending on equipment

Previous Diagram 34/5 (Tracks 43-56)

Next Diagram 34/7 (Tracks 71-84)