Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt

Ribbed Belt Tensioner, Generator, Power Steering Pump and Coolant Pump Belt

Note the following whenever working inside the engine compartment due to limited space:

• Route all lines and wires in their original locations.

• Ensure sufficient clearance to all moving or hot components.

- Remove the ribbed belt. Refer to => [ Ribbed Belts ] Ribbed Belts.

- Loosen the belt tensioner bolt - 2 - and remove the belt tensioner - 1 -.






- Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specifications