Bass Speaker, Rear

Bass Speaker, Rear

Removal and installation of left or right side speakers is identical.

• Switch off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the side trim panel..

- Disconnect the connector - arrows -.






- Drill out the rivets - arrows - and remove the speaker - 1 -.






• Always remove any shavings resulting from the drilling, otherwise they may cause corrosion damage later.

• If paint on door frame is damaged during drilling, touch-up immediately.

Installing

- There are special blind rivets for installing the new speaker. Refer to Electronic Parts Catalog (ETKA).

- The foam strip - 2 - must touch the speaker.






Further installation is in the reverse sequence to removal.

Overview, refer to => [ Speakers Overview ] Speakers Overview.