FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Transmission Mount: Service and Repair






Engine and Transmission Mounts and Brackets Overview






1 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace.

Transmission mount bracket to transmission.

Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission ].

2 Bolts

Pendulum support to transmission.

Transmissions with a threaded insert. Refer to => [ Transmission with a Threaded Insert (for example: ) for attaching the Pendulum Support: ].

3 Engine Mount Bracket

4 Bolt

Engine mount bracket to engine.

5 Engine Mount

6 Bolt

Engine mount to body.

7 Support

8 Bolt

Support to body.

9 Bolt

Support to engine mount.

10 Bolt

Engine mount to body.

11 Bolt

Engine mount to engine mount bracket.

12 Pendulum Support

13 Bolt

Pendulum support to subframe.

14 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace

Transmission mount to transmission mount bracket.

Tightening sequence, refer to => [ Transmission Mount to Transmission Mount Bracket ].

15 Bolt

Transmission mount to chassis.

16 Transmission Mount

Check the adjustment.

Adjusting

17 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace

Transmission mount bracket to transmission.

Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission ].

18 Bolt

60 Nm + 90° (1/4) additional turn.

Always replace

Transmission mount bracket to transmission.

Tightening sequence, refer to => [ Transmission Mount Bracket to Transmission ].

19 Transmission Mount Bracket

Transmission with a Threaded Insert (for example: "HeliCoil") for attaching the Pendulum Support:





There are threaded inserts (for example: "HeliCoil") in the pendulum support bolt holes.

How to recognize: There is a shoulder - arrow - at the first thread.

Transmission Mount Bracket to Transmission





- Replace the transmission mount bracket - 1 - to transmission bolts - arrows -.

- Tighten the bolts - arrows - hand tight.

- Tighten the bolts - arrows - to specification.

Transmission Mount to Transmission Mount Bracket





- Replace the transmission mount - 2 - to transmission mount bracket bolts - arrows -.

- Tighten the bolts - arrows - hand tight.

- Tighten the bolts - arrows - to specification.