Left Rear Level Control System Sensor

Left Rear Level Control System Sensor

Special tools, testers and auxiliary items required

• Torque Wrench 5-50 Nm (V.A.G 1331)

Removing

- If present, remove the heat shield - 1 - - arrows -.






- Disconnect the connector from the left rear level control system sensor (G76).

- Remove bolts - 1 -.






- Release - arrow A - and open the door- 1 -.






- Remove the left rear level control system sensor (G76) from the crossbrace - 2 - - arrow B -.

Installing

Install in reverse order of removal. Note the following:

The lever for the left rear level control system sensor must face upward.

- Position the left rear level control system sensor onto the crossbrace - 2 - so that it is seated in the tab - arrow B -.






- The door - 1 - must audibly engage with the underside - arrow A -.

- Perform a basic setting on the headlamps after replacing them vehicle diagnostic tester.

Tightening Specifications