Turn Signal Bulb: Service and Repair

Front Turn Signal Bulb

• Illustrations depict removal and installation of the left turn signal.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the front turn signals, refer to => [ Front Turn Signals ] Front Turn Signals

- Turn bulb socket and bulb - 1 - all the way in the - direction of the arrow -. Remove it towards the rear and out from the housing.






- Remove the bulb from the bulb socket.

Bulb: H21W 12 V

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Install in reverse order of removal. Note the following:

- Check the functionality of the turn signal.