Daytime Running Lamp: Service and Repair

Daytime Running Lamp/Parking Lamp Bulb

• The illustrations show how to replace the left parking lamp bulb (M1).

• Replacing a bulb in the right headlamp is identical.

• Turn off the ignition and all electrical consumers.

• Remove the key.

Removing

- Remove the headlamp. Refer to => [ Headlamp ] Headlamp.

- Turn the cap - 2 - on the headlamp - 1 - in the - direction of the arrow - and remove it.






- Remove the bulb socket - 2 - from the reflector in - direction of arrow - together with the left side marker lamp bulb (M1).






- Remove the left parking lamp bulb (M1) - 2 - from the bulb socket - 1 - in - direction of arrow -.






Bulb: Glass base bulb 12 V/5 W

Installing

• Do not touch the glass of the bulb during installation. Fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• During installation, ensure proper seating of the cap. Water getting in the headlamp will cause damage.

Install in reverse order of removal. Note the following:

- Install the headlamp. Refer to => [ Headlamp ] Headlamp.

- Check headlamp for functions.