Instrument Cluster, Replace

Instrument Cluster, Replace

Work procedure "replace instrument cluster" contains the following scope of work:

• If a new instrument cluster is installed in the vehicle, the Instrument Cluster Control Module (J285) must be adjusted to the various equipment characteristics and corresponding version for that country.

• To adapt the integrated anti-theft immobilize control module (J362) with the engine control module (J623) , it is necessary to save the data from the engine control module in the replacement instrument cluster.

• Also, all ignition keys must be adapted after installation of a new instrument cluster.

Procedure

- Connect the (Vehicle diagnostic tester).

- Select Guided Fault Finding.

- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Instrument Cluster

• Instrument cluster functions

• Instrument cluster, adaptation/replacing