Footwell Vent, Driver Side

Footwell Vent, Driver Side

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• Check all fasteners for damage and replace them if necessary for installing.

Removing

- Remove driver side footwell trim..

- Remove the bolt - 3 - (1.5 Nm).

- Remove the driver side footwell vent - 2 - from the heater and A/C unit - 1 -.






Installing

Install in reverse order of removal.

- Install the driver side footwell vent - 2 - in the reverse order while making sure that it is aligned correctly to the heater and A/C unit - 1 -.