Front Air Vent Air Guide Channel

Front Air Vent Air Guide Channel

Removing

- Disconnect the battery.

- Remove the driver and front passenger seat.

- Remove the center instrument panel.

- Remove the foot rest cover.

- Loosen the carpet in the footwell on the front passenger side.

- Fold over the carpet far enough so that both of the air guide channels are completely visible.

- Loosen the air guide channels - 2 - from the floor panel - 3 - and slightly lift them.

- Remove the air guide channels - 2 - from the heater and A/C unit - 1 -.






Installing

- Insert the air guide channels - 2 - with a small angle onto the heater and A/C unit - 1 -.

- Clip the air guide channels - 2 - into the floor panel - 3 -.

- Check again that the air guide channels are in their correct positions - 2 - on the heater and A/C unit- 1 -.

Additional installation is in reverse order of removal.