Procedures

Engine, Securing to the Engine and Transmission Holder (VAS 6095)

Special tools, testers and auxiliary items required

• Engine Sling (2024 A)

• Shop Crane - Load Cap = 700-1200 KG (VAS 6100)

• Engine and Transmission Holder (VAS 6095)

Conditions

• The engine and transmission are removed and are secured to the engine-/gearbox jack (V.A.G 1383 A) with the engine support (T10359)

Procedure

- Separate the transmission from the engine. Refer to => [ Engine and Transmission, Separating ] Engine and Transmission, Separating.

- Install the engine sling (2024 A) as shown and lift the engine using the shop crane - load cap = 700-1200 KG (VAS 6100) off the engine-/gearbox jack (V.A.G 1383 A).






Use the securing pins - arrows - on the hooks and pins to prevent damaging the engine.

- Secure the engine to the engine and transmission holder (VAS 6095).