Radiator, Fan Shroud and Fan Overview

Radiator, Fan Shroud and Fan Overview






1 Coolant Fan (V7)

• Removing and installing, refer to => [ Coolant Fan ] Coolant Fan.

2 Nut

• 10 Nm

3 Fan Shroud

• Removing and installing, refer to => [ Fan Shroud ] Fan Shroud.

4 Lower Coolant Hose

• To the connection for the coolant thermostat.

5 Retaining Clip

• Make sure it is secure.

6 Engine Coolant Temperature Sensor on Radiator Outlet (G83)

• With a O-ring

• Replace the O-ring.

7 O-ring

• Replace if damaged.

8 Upper Coolant Hose

• From the coolant pump.

9 O-ring

• Replace if damaged.

10 Bolt

• 5 Nm

• To the charge air cooler.

11 Radiator

• Removing and installing, refer to => [ Radiator ] Radiator.

• After replacing, replace entire amount of coolant. Refer to => [ Coolant, Draining and Filling ] Service and Repair.

• Engine code CBFA: has a radiator identification sensor (G611). Refer to => [ Radiator Identification Sensor (Engine Code CBFA only) ].

12 Nut

• 10 Nm

13 Bolt

• 5 Nm

• To the radiator

14 Coolant Fan 2 (V177)

• Removing and installing, refer to => [ Coolant Fan ] Coolant Fan.

Radiator Identification Sensor (Engine Code CBFA only)





The - arrow - indicates the direction of travel.

A Radiator
B Radiator identification sensor

• The radiator identification sensor can only be replaced with the radiator.