Cowl Moulding / Trim: Service and Repair

Intake Housing

Removing

- Remove the plenum chamber cover.

Vehicles with electrically controlled A/C System

- Remove the air quality sensor (G238). Refer to => [ Air Quality Sensor (G238) ] Air Quality Sensor (G238).

Continued for all vehicles

- Remove the cover - 1 - in the - direction of the arrow - from the body - 4 -.

- Loosen the nut - 2 - (2.5 Nm).

- Remove the air intake shroud - 3 - from the plenum chamber.






Installing

Install in reverse order of removal.

Vehicles with electrically controlled A/C System

- Install the air quality sensor (G238). Refer to => [ Air Quality Sensor (G238) ] Air Quality Sensor (G238).

All vehicles

- Install the right plenum chamber cover.