Entry Assistance Trim

Entry Assistance Trim

• Removal and installation can be performed with the front seat installed.

Removing

- Press the handle - arrow B - forward as far as the stop and hold it in that position.






- Remove the retaining strap - arrow A - in the direction of - arrow - from the tab - arrow C - with the trim removal wedge (3409).

- Perform the same step on the opposite side of the trim - 1 -.

- Tilt the trim - 1 - upward diagonally and remove from the handle with the bracket - 2 -.

- Disengage the rear trim catch from the handle with bracket.

- Remove the trim from the bracket with handle.

Installation

Installation is reverse of removal, noting the following:

- First engage the rear trim catch in the handle with bracket.

- Make sure the trim engages correctly in the handle with bracket.