Center Air Vent

Center Air Vent

Special tools, testers and auxiliary items required

• Trim Removal Wedge (3409)

• The center air vent is removed together with the frame - 2 -.

• Check all fasteners for damage and replace them if necessary for installing.

Removing

- Loosen the frame - 2 - with the (3409) from the instrument panel retainers - 1 -.

- Remove the center air vents - 3 - and - 4 - along with the frame - 2 - from the instrument panel.

- Loosen the left and right center air vents - 3 - - 4 - from the frame clips - 2 - and remove them from the frame.






Installing

Install in reverse order of removal.