Left Rear Coolant Pipe (to EGR Auxiliary Cooler)

Left Rear Coolant Pipe (to EGR Auxiliary Cooler)

Special tools, testers and auxiliary items required

• Hose Clip Pliers (V.A.G 1921)

Removing

- Drain the coolant. Refer to => [ Coolant, Draining ] Coolant, Draining.

- Remove the bolt - 1 -.






- Remove the left rear coolant pipe from the Exhaust Gas Recirculation (EGR) auxiliary cooler.

- Loosen the clamp - arrow - and remove the coolant hose.

Installing

Install in the reverse order of removal. Note the following:

Tightening specifications, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Secure all hose connections using hose clamps appropriate for the model type.

- Clean and/or smooth the sealing surfaces for the O-rings.

- Coat the O-ring with coolant and slide it onto the coolant pipe.

- Fill the coolant. Refer to => [ Coolant, Filling ] Coolant, Filling.