Switches in Center of Instrument Panel

Switches in Center of Instrument Panel

Depending on the vehicle equipment level, the following switches may be installed above the radio/navigation system. Removing and installation is the same for all switches and is described here for only one button.

• Emergency Flasher Switch (E3)

• Parking Aid Button (E266)

• Front Passenger Airbag Disabled Indicator Lamp (K145)

• Peripheral camera button

Removal

When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool (plastic wedge, screwdriver) will be positioned using commercially available adhesive tape.

- Turn off the ignition and all electric consumers and remove the key.

- Remove the front information display control head (radio/navigation system).

- Push the switch, from behind, out of the trim.






1 Front Passenger Airbag Disabled Indicator Lamp (K145)
2 Emergency Flasher Switch (E3)
3 Parking Aid Button (E266)

Installation

Install in reverse order of removal.