Footwell Covers

Footwell Covers

Removing

- Turn off the ignition.

- Unscrew the 3 screws - 1 - on the front passenger side (1.5 Nm), remove the footwell cover - 2 - from the mounts and disconnect the harness connector.

- Unscrew the 4 screws - 3 - on the driver side (1.5 Nm), remove the footwell cover - 4 - from the mounts and disconnect the harness connector.

- Unclip the diagnostic connector from the driver footwell cover.






Installation

- To install, perform the steps used for removal in reverse order.