Windshield Washer Spray Nozzles

Windshield Washer Spray Nozzles






Removing

- Press nozzle upward - arrow A - and pull out flap at rear - arrow B -.

- Open the hose clip - 1 - in - the direction of the arrow - and remove the hose - 2 - from the spray nozzle.






- If the vehicle has heated spray nozzles, disconnect the connector - 3 - and remove the spray nozzle - 4 -.

Installing

- Connect the connector - 3 - to the spray nozzle.






- Connect the hose - 2 - to the spray nozzle and secure it with a hose clip - 1 -.

- Insert the spray nozzle into the opening starting at the top until it audibly engages.

- Adjust the spray nozzles. Refer to => [ Windshield Washer System Spray Nozzles, Adjusting ] Windshield Washer System Spray Nozzles, Adjusting.