Shift Mechanism with Lever

Selector Mechanism with Lever

• Check the cable for ease of movement after installing it.

- Remove the center console. Refer to "Storage Compartments, Covers and Trim".

- Remove the cable from the transmission. Refer to => [ Selector Lever Cable ] Service and Repair.

- Remove the exhaust system components underneath the heat shield.

Vehicles with All Wheel Drive (AWD):

- Remove the driveshaft.

Continuation for all Vehicles:

- Remove the heat shield under the vehicle.

- Remove the selector mechanism.

Tightening specification for the nuts: 8 Nm

- After installing, check the cable. Refer to => [ Selector Lever Cable, Checking ] Testing and Inspection.