Ribbed Belt Pulley Without Freewheel

Ribbed Belt Pulley Without Freewheel

Special tools, testers and auxiliary items required

• Socket (VAS 3310)

• Torque Wrench (V.A.G 1332)

Removing

- Remove generator.

- Tighten the generator in a vise at the mounting points.

- Use the (VAS 3310) to remove the ribbed belt pulley nut from the generator shaft.






Installing

Install in reverse order of removal. Note the following:

- Tighten the M10 threaded connection ribbed belt pulley without freewheel to the generator to 65 Nm.