Blower Motor Resistor: Service and Repair

Fresh Air Blower Series Resistor With Fuse (N24)

Removing


Contact with a hot exhaust system can cause severe burns.

The Fresh Air Blower Series Resistor With Fuse may be hot.

Let Fresh Air Blower Series Resistor With Fuse cool off before removing.

Perform the following work first:

- Remove the partition from the heater. Refer to => [ Heater Partition ] Heater Partition.

- Disconnect harness connector - 1 - from Fresh Air Blower Series Resistor With Fuse (N24).






- Push the retainer in direction of arrow and remove the fresh air blower series resistor with fuse from the heater.

Installing

Install in reverse order of removal.